2.0TSI Billet Aluminum Rear Main Seal Upgrade from iABED Industries

Code: 462-103-171F

US$99.99

In Stock
Included Warranty

12 Months
All CTS Turbo products are warrantied against manufacturing defects for a period of 12 months from the date of invoice. Warranty does not cover abuse, misuse, consequential damages, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective the customer will receive, at the discretion of CTS Turbo, free repair or replacement. Warranty on other manufacturers will be processed under their terms.

Description

Do you own a 2.0T TSI powered VW or Audi? Do you have a engine stumble or misfire, check engine light or mysterious oil leaks in the driveway? There’s a good chance your rear main seal and PCV valve are failing. Don’t replace it with another part from the dealer that is known to fail. iABED Industries has developed an upgraded solution to permanently fix your rear main seal. The most common cause of rear main seal failure is a faulty PCV valve. The TSI engine is known to have PCV valve failures, which will cause an excess of crankcase pressure. This is more pressure than the rear main seal can handle. PCV issues can surface with multiple symptoms or virtually none at all.

The factory stamped unit uses a flimsy and very thin rubber surface to seal around the crankshaft. The crank is constantly spinning inside this seal too so over time as heat cycles are put through the engine, the rubber will expand and contract and become brittle, especially when it is constantly saturated with oil. iABED’s replacement solution uses a patented billet machined plate that is bored to a larger diameter so that a Viton rubber seal can be used. The Viton seal is more heat resistant, fluid resistant, and more than twice as thick.

iABED Industries was founded by Issam Nicholas Abed in 2004. In the humble beginnings , Issam was known as I.N.A. Engineering Inc. which was a small web based company offering  CAD/CAM services assisting in the design and prototyping field to accommodated companies in the industry. Since inception, the company has grown from design to manufacturing and in 2015 iABED Industries was formed as a parent company which better displayed the skill set offered by Issam.

Previous Revisions

  • EW440

Cross Reference

  • 06H103171A, 06H103171F, 462103171F

 

 

Additional information

Weight 10 lbs
Dimensions 12 × 10 × 8 in

Model

Generation

Make Model Year Generation
Make Model Year Generation
AUDI A3 2015 - 2020 8V
AUDI A4 2017 - 2021 B9
AUDI A5 2017 - 2021 B9
AUDI A6 2012 - 2018 C7
AUDI Q5 2018 - 2021 B9
AUDI S3 2015 - 2020 8V
AUDI TT 2015 - 2021 8J
VW BEETLE 2012 - 2018 MK2
VW CC 2009 - 2019 MK1
VW EOS 2009 - 2019 MK1
VW GOLF GTI 2015 - 2021 MK7/7.5
VW GOLF R 2015 - 2021 MK7/7.5
VW JETTA 2012 - 2017 MK6
VW JETTA GLI 2014 - 2017 MK6
VW JETTA GLI 2019 - 2021 MK7
VW PASSAT 2012 - 2017 B7
VW TIGUAN 2018 - 2021 MK2