Sale!

CTS Turbo Connecting Rods VW & Audi 144×21 Rifle Drilled | Fits MK6/B8 2.0T EA888 Gen 1 & 2 With Aftermarket Pistons

Code: CTS-CRH-14421

US$359.99

In Stock
Included Warranty

12 Months
All CTS Turbo products are warrantied against manufacturing defects for a period of 12 months from the date of invoice. Warranty does not cover abuse, misuse, consequential damages, normal wear and tear, improper installation, or damages resulting from racing. Warranties only apply to the original owner. If a product is found defective the customer will receive, at the discretion of CTS Turbo, free repair or replacement. Warranty on other manufacturers will be processed under their terms.

Share (4)
Total: 0 Total: 1 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 3

Description

We are excited to announce our 144×21 rifle drilled drop-in connecting rods forMK6/B8 2.0T EA888 Gen 1 & 2 designed to work with aftermarket pistons. Our connecting rods have been engineered for larger turbo and boost applications while maintaining reliability.

Rifle Drilled

All CTS connecting rods are rifle drilled as standard.

Honing

All big and small end bores are honed in house on precision equipment to exacting tolerances.

Quality Control

All connecting rods are put through a stringent quality control process including measuring all critical dimensions on our state of the art CMM (coordinate measuring machine). All connecting rods are matched in weights +/- 1 gram.

ARP Bolts

All CTS Turbo connecting rods come standard with genuine ARP 2000 rod bolts.

Product Specifications

  • Center to Center: 144mm
  • Wrist Pin Diameter: 21mm
  • Big End Journal Width: 21.90mm
  • Wrist Pin Style: Non-tapered
  • Big End Journal Diameter: 50.60mm
  • Rod Bolt Dimensions: 3/8″

Fitment

  • Audi – A4 2009-2015 (B8 – B8.5) 2.0T TSI EA888 Gen 1 & 2 engines*
  • Audi – A4 Allroad 2009-2015 (B8 – B8.5) 2.0T TSI EA888 Gen 1 & 2 engines*
  • Audi – A5 2008-2015 (B8 – B8.5) 2.0T TSI EA888 Gen 1 & 2 engines*
  • Audi – Q5 2008-2015 (8R) 2.0T TSI EA888 Gen 1 & 2 engines*
  • Audi – A6 2012-2015 (C7 – C7.5) 2.0T TSI EA888 Gen 1 & 2 engines*
  • Audi – TT 2008-2015 (MK2 – 8J) 2.0T TSI EA888 Gen 1 & 2 engines*
  • Audi – A3 2006-2013 (MK2 – 8P) 2.0T TSI EA888 Gen 1 & 2 engines*
  • Audi – Q3 2011-2015 (8U) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – GTI 2006-2009 (MK5) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – GTI 2010-2014 (MK6) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – Jetta & Jetta GLI 2010-2014 (MK6) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – Jetta SportWagen 2011-2014 (MK6) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – CC 2009-2015 (3C8) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – Passat 2006-2010 (B6) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – EOS 2006-2015 (1F7) 2.0T TSI EA888 Gen 1 & 2 engines*
  • VW – Beetle 2011-2015 (MK2) 2.0T TSI EA888 Gen 1 & 2 engines*

*ENGINE CODES: CCTA, CCZA, CCZB, CBF, CBFA, CAEB

Additional information

Weight 12 lbs
Dimensions 12 × 8 × 6 in

SPECS

TECHNICAL SPECIFICATIONS

ABCD

144MM

50.6MM21MMARP 2000

INSTALL SUPPORT

Verify Clearances

 

Before installing your CTS connecting rods it is recommended you measured all the critical clearances. Make sure to record the measurements for each rod and number match them to the bearing set, crankshaft journal, and wrist pins.

** You must use a quality bore gauge and micrometer, record the following measurements:**

  • Wrist pin diameter
  • Wrist pin bushing bore
  • Wrist pin clearance (Bore minus diameter
  • Rod journal (w/bearings)
  • Crankshaft journal diameter
  • Journal clearance 

 

Torque Specifications

STEP 1 -PRE-TORQUE:

Before you final stretch the rod bolts, it’s important the bolt and rod threads are fully seated.

  • Install rod bearings
  • Align matching printed numbers on rod and cap
  • Assemble cap to rod
  • Apply ARP assembly lube to bolt threads
  • Hand tighten bolts
  • Using a quality calibrated torque wrench, torque bolts to 50 ft/lbs
  • Break bolts loose, and again torque to 50 ft/lbs
  • Break bolts loose, then torque to 50 ft/lbs one final time

STEP 2 -FINAL TORQUE:
The final torque spec is .006″ (stretch gauge) or 50 ft/lbs (torque wrench) with ARP assembly lube. The preferred method of measuring bolt load is with a stretch bolt gauge.

Stretch Gauge

  • Loosen bolt and zero stretch gauge
  • Tighten bolt to .006″ stretch
  • Loosen second bolt and zero stretch gauge
  • Tighten second bolt to .006″ stretch

Torque Wrench

  • Loosen bolt
  • Tighten bolt to 50 ft/lbs
  • Loosen second bolt
  • Tighten second bolt to 50 ft/lbs

Important notes

  • Do not exceed rod bolt stretch/torque. If bolt stretch is exceeded, replace rod bolts with new ones.
  • Torque wrench settings are given as a guide only, to ensure proper bolt installation a stretch gauge is required.
  • Do not install bolts dry or with any other lubricant than the supplied ARP assembly lube.

Model

Generation

Make Model Year Generation
Make Model Year Generation
AUDI A3 2006 - 2013 8P
AUDI A4 2009 - 2015 B8/8.5
AUDI A5 2008 - 2015 B8/8.5
AUDI A6 2012 - 2013 C7
AUDI A6 2014
AUDI A6 2015 C7
AUDI Q3 2011 - 2015 8U
AUDI Q5 2009 - 2015 B8/8.5
AUDI TT 2008 - 2015 8J
VW BEETLE 2011 - 2015 MK2
VW CC 2009 - 2015 MK1
VW EOS 2006 - 2015 MK1
VW GTI 2006 - 2009 MK5
VW GTI 2010 - 2014 MK6
VW JETTA 2010 - 2014 MK6
VW JETTA GLI 2010 - 2014 MK6
VW PASSAT 2006 - 2010 B6

You may also like…

Related products